Sherwood R-765 Operating Instructions Manual page 8

6. CONNECTING VIDEO COMPONENTS equipped with COMPONENT VIDEO jacks
VIDEO 1
VCR, etc.
• The excellence in picture quality is as follows:
"COMPONENT" > "S-VIDEO" > normal(composite) "VIDEO"
• When making COMPONENT VIDEO connections, connect "Y" to "Y", "P
"C "(or "R-Y", "P ").
R R
• Signals input into the COMPONENT VIDEO IN jacks will be output in only the MONITOR COMPONENT VIDEO OUT
jacks.
Notes :
• The on-screen display function and recording the component video signals are not available when using the
COMPONENT VIDEO connections.
• When Sherwood DVD player such as V-756, etc. is connected to the DIGI LINK jack for system control, you should
connect the DVD player to the "VIDEO 2" jacks of this unit.
Because, if the PLAY button, etc. is pressed on the DVD player, the VIDEO 2 is automatically selected as an input
source on this unit and the playback, etc. starts
VIDEO 2
DVD player, COMPONENT
VIDEO OUT
LD player, etc.
P P Y
R B
COMPONENT
IN VIDEO 2
VIDEO 1
P /C P /C Y P /C P /C
R R B B R R B B
P P Y
R B
COMPONENT
VIDEO OUT
8
IN MONITOR OUT
Y P /C P /C Y
R R B B
P P Y
R B
MONITOR
COMPONENT
VIDEO IN
TV, projector, etc.
/C " to "C " (or "B-Y", "P
B B B
") and "P /C " to
B R R