Sherwood R-765 Operating Instructions Manual page 29

Adjusting each channel level with test tone
• The volume level of each channel can be adjusted easily with the test tone function.
Note : When the 7 CH DIRECT is selected as an input source, the SPEAKER button is set to off or it is in the stereo
mode, the test tone function does not work.
Enter the test tone mode.
1
T.TONE
At each channel, adjust the level as desired
2
until the sound level of each speaker is heard
to be equally loud.
ADJUST
or
• You can select the desired channel and adjust its level with
repeating the steps 1 and 2 in "Adjusting each channel
level" procedure.
Adjusting the current channel level
• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources
or to suit your tastes.
Press the CHANNEL SELECTOR button.
1
CHANNEL
SELECTOR
or
• You can adjust the LFE level for Dolby Digital or DTS program source that includes LFE signal.
• When it is in the stereo or Dolby Virtual mode or the speaker setting is "N", center, surround L/R,
surround back or subwoofer channel will not be selected.
• When the SPEAKER button is set to off, only the front L/R channel can be selected.
1
5
9
M1
• The test tone will be heard from the speaker of each
T/V
• When the speaker setting is "N", the test tone of the
1 2 3 4
CH/LEVEL
5 6 7 8
T/V T/V
9 0 +10
MACRO
M1 M2 M3
2 3 4 2
1 1
5 6 7 8 5 6
9 0 +10 9 0
MACRO MACRO
M1 M2 M3 M1 M2
CH.SEL
T/V
2 3 4
6 7 8
0
+10 29
MACRO
M2 M3
channel for 2 seconds as follows:
FL C FR SR
T/V
Front Left Center Front Right Surround
Right
SW
Subwoofer
corresponding channel is not available.
Cancel the test tone function.
3
1 2 3 4
5 6 7 8
T/V
T.TONE
9 0 +10
MACRO
M1 M2 M3
3 4
1 2
7 8
+10
5 6
9 0
M3
MACRO
• "REF. 1"(or "USER", etc.) is displayed and each
M1 M2
time this button is pressed, the corresponding channel
is selected and displayed for several seconds as
follows:
T/V
FL C FR
( DTS L DD L )
DTS LFE Dolby Digital LFE
( ) : impossible when the analog input is selected as
signal input.
1 2 3 4
5 6 7 8
9 0
+10
MACRO
M1 M2 M3
SB SL
Surround Surround
Back Left
T/V
3 4 1
7 8 5
9
+10
MACRO
M3 M1
SR SB
SW SL
T/V
2 3 4
6 7 8
0
+10
M2 M3