Digital Audio Recording With Md Recorder - Sherwood R-765 Operating Instructions Manual

Start recording on the VIDEO 1.
3

DIGITAL AUDIO RECORDING WITH MD RECORDER

• Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD
recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to "
CONNECTING AUDIO COMPONENTS", "CONNECTING VIDEO COMPONENTS" and "CONNECTING DIGITAL INs and
OUT" on pages 6~9 and the operating instructions of the MD recorder or CD recorder.
Notes:
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.
Select a desired input of CD, VIDEO 1~3
1
as a recording source.
INPUT SELECTOR
AUDIO VIDEO
or
Start recording on the component
3
connected to OPTICAL DIGITAL OUT.
• The audio signal from the CD and the video signal
Note : Be sure to observe the order of the above steps
T/V
CD
VIDEO 1
• Each time this button is pressed, the corresponding
VIDEO 2
1 2 3 4 1 2
VIDEO 3
5 6 7 8 5 6
9 0 +10 +10 9 0
MACRO MACRO MACRO
M1 M2 M3 M1 M2
35
Start play on the VIDEO 2 and the CD
4
respectively.
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
1 and 2.
For digital recording, select the desired
2
T/V
digital input as recording signal input.
DIGITAL
INPUTS
input is selected as follows: 3 4
7 8
A(nalog) c(oaxial) 1 c(oaxial) 2
+10
o(ptical) 2 o(ptical) 1
M3
Note : When the selected digital input is not
connected, "DIGITAL" indicator flickers.
There will be no recording as well as no sound.
Start play on the desired input.
4