Summary of Contents for Telit Wireless Solutions ME50-868
Page 1
ME50-868 Demo Case User Guide 1vv0300907 Rev.5 – 2012-10-15...
Page 2
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 APPLICABILITY TABLE APPLICABILITY TABLE APPLICABILITY TABLE APPLICABILITY TABLE PRODUCT PRODUCT PRODUCT PRODUCT...
Page 3
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein.
Page 4
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 Usage and Disclosure Restrictions License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.
Scope The aim of this document is to describe the DemoCase dedicated to Wireless M-bus demonstration, based on ME50-868 modules, embedding Telit in house Wireless M-Bus stack. After a short description of the Democase and its installation principles, its functioning will be detailed in more advanced operation modes.
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 1.4. 1.4. Document Organization Document Organization 1.4. 1.4. Document Organization Document Organization This document contains the following chapters (sample): “Chapter 1: Introduction”...
The DemoCase contains devices based on ME50-868 radio module: • ME50-868: it is a 25mW radio module, allowing range up to 1.5 km. For more HW information on ME50-868, please refer to the dedicated documentation [1] available on the Telit web site.
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 2.5. 2.5. List of equipment List of equipment 2.5. 2.5.
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 4. 4. 4. 4. Installation of ME50 Installation of ME50 Installation of ME50 Installation of ME50- - - - 868 4.1.
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 4.2. 4.2. DemoBoard Connection DemoBoard Connection 4.2. 4.2. DemoBoard Connection DemoBoard Connection In order to connect a demoboard : 1.
This chapter contains a step-by-step tutorial on how to set up communication between two ME50-868 modules and how to transfer a simple frame from one module to another. One module will be configured as meter and the other module will act as “other” device (data concentrator).
Page 15
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 3. In the “Serial Protocol” panel, select the PC serial port connected to the DemoBoard and select 19200 as baud rate;...
Page 16
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 4. Click on “Configuration Wizard”; a new window appears: Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 17
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 5. Select “T2 Meter” in the “M-Bus Mode” panel, select “C Field” and “CI Field” in the “Serial Rx Format”...
Page 18
User Guide 1vv0300907 Rev.5 – 2012-10-15 7. In the bottom panel the “OK” response from ME50-868 is shown. Now the module in the first DemoBoard is configured to work as meter in T2 mode and is ready to send or receive data. Keep this window open because it will be used afterwards to send an example frame.
Page 19
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 9. Select “T2 Other” in the “M-Bus Mode” panel, select “Length”, “C Field”, “M Field”, “A Field”...
Page 20
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 “Command Type” panel, type the above byte sequence in the “Raw Data” text box and press Enter: 11.
Page 21
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 12. Specifically, the bottom panel shows the bytes corresponding to the settings previously applied in the “Serial Tx Format”...
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 6. 6. 6. 6. Glossary Glossary Glossary Glossary Adjacent Channel Power Bit Error Rate Bits/s Bits per second (1000 bits/s = 1Kbps)
ME50 ME50- - - - 868 Demo Case 868 Demo Case User Guide User Guide ME50 ME50 868 Demo Case 868 Demo Case User Guide User Guide 1vv0300907 Rev.5 – 2012-10-15 7. 7. 7. 7. Document History Document History Document History Document History Revision Date...
Need help?
Do you have a question about the ME50-868 and is the answer not in the manual?
Questions and answers