ABB Aztec 600 User Manual page 2

For more information
Further publications for the Aztec 600 series analyzers are
available for free download from:
www.abb.com/analytical
(see links and reference numbers below) or by scanning this
code:
Data Sheet
Aztec 600 Aluminium
Aluminium analyzer
Data Sheet
Aztec 600 Ammonia
Ammonia analyzer
Data Sheet
Aztec 600 Color
Color analyzer
Data Sheet
Aztec 600 Iron
Iron analyzer
Data Sheet
Aztec 600 Manganese low range
Low range manganese analyzer
Data Sheet
Aztec 600 Manganese
Manganese analyzer
Data Sheet
Aztec 600 Phosphate
Phosphate analyzer
Operating Instruction
Aztec 600 aluminium, ammonia, color, iron,
manganese, phosphate
Single- and multi-stream colorimetric
analyzers
Data Sheet
AAM631
Aztec 600 ISE ammonia analyzer
Data Sheet
AFM631
Aztec 600 ISE flouride analyzer
Operating Instruction
Aztec 600 ISE ammonia and flouride
Single-stream ion-selective analyzers
Electrical safety
One or more of the following symbols may appear on the
equipment labeling:
Search for or click on
DS/AZT6AL-EN
DS/AZT6AM-EN
DS/AZT6C-EN
Information in this manual is intended only to assist our
customers in the efficient operation of our equipment. Use of
DS/AZT6IR-EN
this manual for any other purpose is specifically prohibited and
its contents are not to be reproduced in full or part without
prior approval of the Technical Publications Department.
DS/AZT6ML-EN
Health and safety
DS/AZT6MN-EN
To ensure that our products are safe and without risk to health,
the following points must be noted:
DS/AZT6P-EN
• The relevant sections of these instructions must be read
• Warning labels on containers and packages must be
IM/AZT6CR-EN
• Installation, operation, maintenance and servicing must
DS/AAM631-EN
• Normal safety precautions must be taken to avoid the
DS/AFM631-EN
• Chemicals must be stored away from heat, protected from
OI/AXM630-EN
• When disposing of chemicals ensure that no two chemicals
Safety advice concerning the use of the equipment described in
this manual or any relevant hazard data sheets (where
applicable) may be obtained from the Company address on the
back cover, together with servicing and spares information.
Warning – Refer to the manual for instructions
Caution – Risk of electric shock
Protective earth (ground) terminal
Earth (ground) terminal
Direct current supply only
Alternating current supply only
Both direct and alternating current supply
The equipment is protected through double insulation
carefully before proceeding.
observed.
only be carried out by suitably trained personnel and in
accordance with the information given.
possibility of an accident occurring when operating in
conditions of high pressure and/or temperature.
temperature extremes and powders kept dry. Normal safe
handling procedures must be used.
are mixed.