Service And Maintenance; Real Time Clock Battery Replacement - GE PACSystems ICRXIDIXNE19LCTA User Manual

19" rxi display
Hide thumbs Also See for PACSystems ICRXIDIXNE19LCTA:
Table of Contents

Advertisement

4 Service and Maintenance

4.1 Real Time Clock Battery Replacement

Service and Maintenance
For public disclosure
Warning
The Real Time Clock (RTC) is backed up by a lithium coin cell battery, IC690ACC001.
The RTC battery has an estimated life of 5 years.
The following tools are needed to replace the RTC battery:
One #2 Phillips screwdriver
Battery (part number IC690ACC001)
Warning
Warning
Caution
Risk of Fire — there are no user-serviceable fuses in
the RXi Display.
The replacement battery must be IC690ACC001
from GE Intelligent Platforms. Using a different
battery type than specified may present a high risk
of fire or explosion.
The battery may explode if mistreated. Do not
recharge, disassemble, heat above 100°C (212° F), or
incinerate.
To avoid damage from electrostatic discharge,
adhere to the following precautions when opening
the RXi Display:
1) Wear a properly functioning antistatic strap and
be sure that you are fully grounded. Never touch
any components inside the RXi Display unless you
are wearing an antistatic strap.
2) The RXi Display should be placed on a static-safe
surface, facilitated by antistatic mats.
3 ) Extra caution should be taken in cold, dry
weather, when static charges can easily build up.
GFK-2898B 29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pacsystems icrxidixnm19lctaPacsystems icrxidi0nm19lctaPacsystems icrxidi0ne19lctaIcrxidixne19lctaPacsystemsIcrxidixnm19lcta

Table of Contents