GE PACSystems ICRXIDIXNE19LCTA User Manual page 21

O V +24 V
FGND
For model numbers, refer
to the table Ordering
Information.
Pre-Installation Checks and Initial Startup
For public disclosure
➢ ➢ To initially start up the RXi Display
1. Attach the power supply output to the RXi Display's dc power plug using 16 – 24 AWG
(1.31– 0.20 mm 2 cross section) wire. For frame ground, use shortest length 16 AWG
(1.31 mm 2 ) wire to ground. The recommended wire stripping length is 7 mm (0.28 in).
Tighten the screws that hold the wires to a torque of 0.452 Nm (4 in-lb).
Insert the plug into the RXi Display's input power connector and securely tighten the
2.
attaching screws. The torque range for the attaching screws is 0.452 Nm (4 in-lb). (For
proper grounding, refer to the section Grounding.)
3. (Optional) If desired, attach a USB-compatible keyboard and a USB-compatible mouse.
4. Power up the unit and check for any concealed damage that may have been caused by
incorrect transportation, operating/storage conditions or handling. To power up the unit,
touch Power On/Off for at least ½ second.
Caution
During power up, you should see the normal operating system starting displays on the
monitor. During normal power up and operation, the Power On/Off status indicator displays
as follows:
LED
Solid white
Blinking blue
Solid green
Solid green
For models loaded with Windows 7 Professional, the operating system starts
5.
automatically. During startup, the operating system splash screen displays on the monitor.
To activate the operating system, follow the on-screen prompts. The Windows 7 product
key is on the Microsoft Certificate of Authenticity label, which is on the side of the RXi
Display.
To activate the operating system online, configure the RXi Display's Ethernet settings for
operation on your network.
Note For models without an operating system, two hard drive options are available: a
blank 32 GB mSATA SSD or a blank 250 GB SATA magnetic HDD. Load the desired
operating system and associated drivers to fully use the I/O interfaces.
If you notice any damage, remove power from the
unit immediately and secure it against unintentional
use.
Power On/Off LED Status Indicator
Description
RXi Display is off
RXi Display is turned on after input power is restored
RXi Display has completed startup and is running
RXi Display is turned on without input power loss
GFK-2898B 21