24
GFK-2898B
For public disclosure
2.4.1 Disabling Operating System Shutdown
The current On/Off button operation requires a touch of approximately 100 ms to begin a
controlled Windows shut down. You can change this setting in Windows to require
touching the On/Off button for 4 seconds to immediately perform a hard shutdown that
forces the unit off without first shutting down Windows. This provides some protection
against unplanned shutdowns caused by accidentally touching the button. If a hard
shutdown is acceptable, change the Off button touch-time to 4 seconds using Windows 7
settings.
➢ ➢ To change the Off button touch-time using Windows
From the Start menu, select Control Panel.
1.
Select Hardware and Sound section (if displayed).
2.
Select Power Options.
3.
Select Choose what the power buttons do.
4.
5.
Change the When I press the power button selection to Do Nothing.
6.
Save the changes.
Note To completely disable the power off function, set a switch that is located inside the
RXi Display. This disables the ability to shut down the RXi Display using the On/Off
button and prevents unplanned shutdowns that may be caused by accidentally touching
the On/Off button. Refer to the section
Disabling the Off
Button.
PACSystems 19" RXi Display