2.4 Shutting Down the Computer
Refer to the table
Power
On/Off LED Status
Indicator.
Pre-Installation Checks and Initial Startup
For public disclosure
Caution
Caution
➢ ➢ To shut down the RXi Display
1.
Touch Power On/Off briefly (between 100 ms and 4 seconds), or select Shut
Down from the Windows Start menu. This provides a controlled shutdown of the
operating system before removing power from the system. The status indicator
remains solid green while the RXi Display is shutting down and then turns white
when the RXi Display has finished powering down.
2.
To completely shut down the RXi Display, turn off or remove the power supply to the
RXi Display.
To avoid damaging files, always shut down Windows
software before removing power from the RXi
Display.
Do not disconnect external devices, such as a flash
drive or external DVD drive without first using the
Windows Safely Remove Hardware feature to eject
the device. Failure to observe this precaution could
result in damage to data.
GFK-2898B 23