Table of Contents
Advertisement
TINS-A082UMN1.book Page 49 Monday, November 4, 2002 2:33 PM
MORE INFORMATION ABOUT YOUR VCR
VCR RESET
1.
STOP
Press the
2.
Press and hold
the VCR for 10 seconds.
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel this can be set manually between channels 21 and
69 by following the procedure below.
1.
Press the
STANDBY
2.
Press and hold the
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
buttons.
5.
Your TV will now require tuning to the new
channel. (The screen opposite should be
displayed on the TV)
6.
SET
Press the
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON. To do this press the
remote control at point 3 from
TUNING
on page 6. This will help minimise interference.
STOP
button on the front of the VCR.
MENU
and
CHANNEL UP
✔
VCR RESET IS NOW COMPLETE
button.
MENU
button for 3 seconds.
SET
button to store.
(White text
blue background)
RF CHANNEL TUNING
www.sharp.co.uk/support
CHANNEL
K
buttons together on the front of
MENU SELECT
V CR R F
S E T
: E N T E R
CLEAR
then
SET
above
or
at point 4 of
49
/
ME NU : E X I T
SET
buttons on the
AUTO
Hide quick links:
Advertisement
Table of Contents
