Table of Contents
Advertisement
TINS-A082UMN1.book Page 15 Monday, November 4, 2002 2:33 PM
BASIC OPERATION
IMMEDIATE RECORDING CONTINUED
TAPE SPEED SELECTION
Your VCR has three tape speeds: SP (Standard Play), LP
(Long Play) and EP (Extended Play).
TAPE SPEED
Press the
control or on the VCR front panel to select the desired
setting.
It is recommended that EP recordings are only played back on the VCR on which they were
originally recorded.
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR as
above.
3.
To start recording, press
4.
To pause during recording, press
5.
To continue recording, press
6.
To stop recording, press
SIMPLE TIMED RECORDING:
1.
Press
REC
2.
To specify a stop time, each additional press of
REC
will delay the stop time by 10
minutes.
3.
To stop recording at any time, press
STOP
NOTES:
•
If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place
the VCR in STANDBY timer mode if the VCR is in timer record mode.
•
If the VCR ejects the video tape when you press
i.e. record protection tab has been removed.
button on the remote
REC
.
PAUSE/STILL
REC
.
STOP
.
once.
www.sharp.co.uk/support
Cassette
Length
E-240
S P
L P
E P
7
.
REMOTE CONTROL
once.
STOP 15:30
REC
the tape is record protected.
15
Recording
Time
In Minutes
240
480
720
8
9
0
Hide quick links:
Advertisement
Table of Contents
