TINS-A082UMN1.book Page 13 Monday, November 4, 2002 2:33 PM
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
•
For double speed playback (without sound), press the
•
To revert to normal playback, press the
•
To stop the video tape, press
•
To eject the tape press
SHARP SUPER PICTURE
normally set to ON. To turn
on the VCR front panel.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
•
Press the
VCR CHANNEL
to position picture interference off the TV screen. (Manual
Tracking)
•
Press the
VCR CHANNEL
buttons together to start Auto Tracking.
PAUSING AND SLOW MOTION
1.
Press the
PLAY/X2
playing.
2.
To pause the video tape, press
•
To minimise jitter whilst in pause mode press the
VCR CHANNEL
•
Press the
PLAY/X2
3.
To playback in slow motion (without sound) press the
SLOW
button on the remote control. Slow motion
speed can be adjusted using the
next to the slow button. Picture disturbance can be
improved by pressing the
buttons up or down during slow motion playback.
•
Press the
PLAY/X2
NOTES:
•
When using SLOW MOTION function some mechanical noise may be heard.
•
There will be picture interference and possibly a change to black and white picture
using the Pause and Slow functions.
•
PAUSE mode will automatically disengage after about 5 minutes.
PLAY/X2
STOP
.
EJECT
on the VCR.
should enhance the picture quality during playback. It is
SHARP SUPER PICTURE
/
buttons up or down
UP and DOWN
button to start the video tape
PLAY / X2
PAUSE/STILL
/
buttons up or down.
button to resume playback.
PLAY / X2
or
buttons
VCR CHANNEL
button to resume playback.
PLAY / X2
www.sharp.co.uk/support
13
PLAY/X2
button again.
PLAY / X2
button again.
PLAY / X2
on or off press
SUPER P.
flashes on the on-screen
/
VIDEO
Plus+
1
2
4
5
REMOTE CONTROL
.
/
REMOTE CONTROL
SUPER P .
3
6