Siemens S46 User Manual page 94

6.11.01 S46 US DRAFT
Problem
Message cannot be
sent.
PIN error.
Phone code error.
Service provider
code error.
Too few / too many
menu items.
No fax possible.
Damage
Severe shock.
Reset all settings to the factory default: * # 9 9 9 9 #
Further information can be found on the Internet under:
http://www.siemens.com/productservice
A31008-H5450-A5-*
Troubleshooting
Possible causes
Some service providers do not support
this service.
Phone number of the service center is
not set or wrong.
SIM card contract does not support this
service.
Service center overloaded.
Addressee does not have a compatible
phone.
Three wrong entries.
Three wrong entries.
No authorization for this service.
Functions may have been added or re-
moved by your service provider via the
SIM card.
Incorrect settings in the PC.
No authorization for this service.
Wrong infrared driver in the PC.
Mode set to "only TDMA."
Remove battery and SIM and insert them again. Do not dismantle the phone.
Possible corrective measures
Check with your service provider.
Set service center (p. 41).
Contact your service provider.
Repeat message.
Check.
Enter the MASTER PIN (PUK) provided
with the SIM according to the instructions.
If MASTER PIN or PIN has been lost, con-
tact your service provider.
Contact Siemens Service (p. 90).
Contact your service provider.
Check with your service provider.
Check settings (p. 88).
Contact your service provider.
Install latest infrared driver.
Set "automatic" or "only GSM."
93