Table of Contents
Advertisement
The Communication Phase LED
The Communication Phase (CP) LED provides information as to what
phase the SERCOS link is in.
SERCOS Communication Phase Status Using the CP Indicator
If the CP LED displays:
Solid Orange
Off
Flashing Red
Alternating Red/Green
Flashing Green
Solid Green
1784-PM16SE Card Specifications
Number of Nodes
Card location
Card keying
Power Dissipation
Backplane Current
Environmental Specifications
Slot Temperature
Storage temperature
Relative Humidity
Shock
Operating
Non-operating
Vibration
16 Axis PCI SERCOS interface Card
Then the card status is:
In Phase -1: Autobaud detection in progress.
In Phase 0: looking for a closed ring.
In Phase 1: looking for active nodes.
In Phase 2: configuring nodes for
communication.
In Phase 3: configuring device specific
parameters
In Phase 4: configured and active.
16 axes maximum
32 bit 33MHz primary PCI Bus slot
3.3 / 5 VDC universal
7.5 W maximum
5 VDC @ 1.065 A and 3.3 VDC @ 0.050 A
0-60° C (32-140° F)
-40 to 85ºC (-40 to 185ºF)
30 to 95% non condensing IEC 68-2-30
30g peak acceleration, 11(±1)ms pulse width
50g peak acceleration, 11(±1)ms pulse width
2g @ 10-150Hz per IEC 68-2-6
Publication 1784-IN041A-EN-P – June 2003
25
1
Advertisement
Table of Contents
