Allen-Bradley 16 Axis PCI SERCOS Installation Instructions Manual page 19

Interface card
Table of Contents

Advertisement

Fiber Optic cables made from glass are a better conduit for the light to pass
through thus increasing the length of cable that may be used and still supply
a strong enough signal for use with the 1784-PM16SE card.
The card is connected to the drive(s) via a 200 µm glass fiber optical cable.
Glass fiber optic cables have a transmission range of 1 meter to 200 meters.
The maximum bend radius is 2.5 cm. Both the transmitter and receiver
connections are made using a F-SMA standard plug that conforms to the
F-SMA screw type connector.
Premade glass fiber optic cable assemblies are available from Allen-Bradley.
Glass fiber optic cables come with a standard jacket (Polyvinyl Chloride) for
use in normal environments.
The following table shows the catalog numbers and lengths available for
premade glass fiber optic cables. These cables have a standard jacket
(Polyvinyl Chloride) for use in normal environments.
Allen-Bradley Catalog
Number
2090-SCVG1-0
2090-SCVG3-0
2090-SCVG5-0
2090-SCVG8-0
2090-SCVG10-0
2090-SCVG15-0
2090-SCVG20-0
2090-SCVG25-0
2090-SCVG32-0
2090-SCVG50-0
2090-SCVG100-0
2090-SCVG150-0
2090-SCVG200-0
Length in meters
(feet)
1 m (3.28 ft)
3 m (9.84 ft)
5 m (16.26 ft)
8 m (26.25 ft)
10 m (32.81 ft)
15 m (49.22 ft)
20 m (65.62 ft)
25 m (82.03 ft)
32 m (104.99 ft)
50m (164.05 ft)
100m (328.1 ft)
150m (492.15 ft)
200m (656.2 ft)
16 Axis PCI SERCOS interface Card
Publication 1784-IN041A-EN-P – June 2003
19

Advertisement

Table of Contents
loading

Table of Contents