Electrolux EQT4520BOZ User Manual page 10

10 www.electrolux.com
First set the roasting zone then set
the function. The selection of the Timer
function is possible for roasting zones
that are active and after the temperature
is set.
To set the roasting zone: touch
again and again until the indicator of a
necessary roasting zone comes on.
When this function is active,
on.
To activate the function: touch
the timer to set the time (00 - 99
minutes). When the indicator of the
roasting zone starts to flash slowly the
time counts down.
To see the remaining time: set the
roasting zone with
the roasting zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the roasting
zone with
To deactivate the function: set the
roasting zone with
remaining time counts back to 00. The
indicator of the roasting zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The roasting
zone deactivates.
To stop the sound: touch
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the roasting zone operates.
To set the roasting zone (if more than
1 roasting zone operates): touch
again and again until the indicator of a
necessary roasting zone comes on.
When this function is active,
on.
To activate the function: touch
symbol
To see how long the roasting zone
operates: set the roasting zone with
The indicator of the roasting zone starts
. The indicator of
. Touch or .
and touch
goes out and comes on.
to flash quickly. The display shows how
long the zone operates. During the first
minute the display shows the time in
seconds. After the first minute the display
shows the time in minutes.
To deactivate the function: set the
roasting zone with
symbol
comes
To reset the function: touch
time counts back to 00.
of
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the roasting zones do not operate (the
temperature display shows
To activate the function: touch
Touch
time. When the time comes to an end,
. The
the sound operates and 00 flashes.
To stop the sound: touch
4.5 Lock
.
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
comes
The previous heat setting comes on.
. The
.
and touch
goes out and
If two functions operate at
the same time, the display
shows the CountUp Timer
function first.
or of the timer to set the
The function has no effect
on the operation of the
roasting zones.
When you deactivate the
hob, you also deactivate this
function.
. The
comes on.
. The
).
.
.
.
.