Compact Disc Operation - Sharp MD-M2H Operation Manual

COMPACT DISC OPERATION

CD playback
3
4
5
1
H
2
2
1
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL TOTAL
REMAIN
Total number of tracks Total playing time
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the CD button.
3
Press the 7 CD EJECT button to open the CD
compartment.
4
Place the CD on the spindle, label side up.
5
Close the CD compartment by firmly pushing
the corner marked "PUSH CLOSE".
The total number of tracks and the total playing
time will be displayed.
6
PUSH CLOSE
Press the 0 6 button to start playback from track 1.
When the last track has been played back, the
unit will stop automatically.
To interrupt playback:
Press the 0 6 button.
"6" will appear.
Press the 0 6 button again to resume playback
from the same point.
To stop playback:
6 Press the
After use:
Press the ON/STAND-BY button to enter the stand-
by mode.
Caution:
Do not open the CD compartment during play-
back (or whilst paused).
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may
H cause mistracking.
6
When the unit is not being used, be sure to close
the CD compartment. If it is left open, the lens
may become covered with dust and the unit may
not operate properly.
Playing certain compact discs at a high volume
may cause mistracking. In this case, listen at a
lower volume.
Flash
If TV or radio interference occurs during CD op-
eration, move the unit away from the TV or radio.
kHz REC
MHz SLEEP
11
button.