Sharp MD-M2H Operation Manual page 15

(Continued)
APMS (Automatic Programmable
Music Selector)
(Remote control operation)
CLEAR
1
1
Select the desired programme source, CD or
MD, by pressing the CD or MD button.
2
Press the MEMORY button.
MEMORY
MEMORY
3
Press the 5 3 or 2 4 button.
TRACK
TRACK
MEMORY
Selected track number
4
Press the ENTER button.
MEMORY
TOTAL
TOTAL
Playback order
5
Repeat steps 3 and 4 for any other tracks up to
20 tracks (P-20) can be programmed.
6
Press the button.
MEMORY
MEMORY
TOTAL
Total number of tracks
7
Press the 0 6 button to start playback of the
programmed selections.
After all of the programmed tracks have finished
playback, the unit will automatically stop.
To clear the programmed selections:
Press the CLEAR button whilst the "MEMORY"
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the APMS:
4
Whilst the unit is stopped in the APMS mode, press
the CLEAR button to turn off the "MEMORY" dis-
2
play.
3
The programme contents will be erased.
7
When you open the CD compartment or a
6
MiniDisc is ejected, the APMS mode will be can-
celled.
To check which tracks are programmed:
Whilst the unit is stopped in the APMS mode, press
the 5 3 or 2 4 button.
Adding tracks to the programme
REC If a programme has been previously stored, the
"MEMORY" indicator will be displayed. Then
follow steps 2 - 6 to add additional tracks, the new
tracks will be stored after the last track of the origi-
nal programme.
REC
Notes:
It is not possible to insert an additional track
between programmed tracks that have already
been entered.
Programming and canceling are not possible
during playback or in the pause mode.
Total playing time
14
Track number Playback order