Sharp MD-M2H Operation Manual page 38

(Continued)
To combine two non-contiguous tracks:
(Example: the first and third tracks)
Move the third track to the second track using the
MOVE function.
Then, combine the first and second tracks using
the COMBINE function.
Notes:
Tracks recorded from analogue inputs cannot be
combined with tracks recorded from CDs or MDs
using the digital inputs.
Tracks recorded in the stereo mode cannot be
combined with tracks recorded in the monaural
long-play mode.
Tracks where either track's recording time is less
than 15 seconds may not be combined.
This function cannot be used in the random play
mode and APMS play mode.
Move
(Remote control operation)
2
2
1
Whilst in the stop mode, select the track you
want to move pressing the 5 3 or 2 4
button.
Or start playing the track to be moved, and then
press the 0 6 button.
2
Press the NAME/TOC EDIT button, and within
10 seconds, select "MOVE" pressing the
or button.
3
Within 10 seconds, press the ENTER button.
4
Select the new track position pressing the
or
To cancel the operation, press the
5
Press the ENTER button again.
The track is moved, and the unit is stopped at
the beginning of the new track selected in step
4.
Notes:
When a track has been moved, the other tracks
which are affected will be assigned new track
numbers automatically.
This function cannot be used in the random play
mode and APMS play mode.
Example:
4
When moving the fifth track to the third track, the
old third track will become the new fourth track, and
the old fourth track will become the new fifth track.
3,5
1
1
H
37
button.
button.