Query Commands - Associated Research 7620 HypotULTRA III Operation And Service Manual

COMMAND
SCDA < value >
SCDA?
SCDU < value >
SCDU?
SA < value >
SA?
SD < value >
SD?
SDF < value >
SDF?
ST < value >
ST?
STF {1|0}
STF?
SD1 < value >
SD1?
SD2 {1|0}
SD2?
SPM {2|1|0}
SPM?
SPRE {1|0}
SPRE?
SPS {1|0}
SPS?
SFF {1|0}
SFF?

7.4.6. Query Commands

These query commands will retrieve data from the instrument. The GPIB bus
application requires an IEEE-488 read command to be sent after the query command.
These commands include functions for retrieving test data, test results and remote
hardware status as well as setup file information.
___________________________________________________________________________________________
NAME
Cal Date
Cal Due
Alert Date
Date
Date Format
Time
Time Format
Device ID
Device ID
Print Mode
Prn Result n
Prn Setting n
Form Feed n
VALUE
mm,dd,yy or yy,mm,dd or
dd,mm,yy
according to SDF setting
mm,dd,yy or yy,mm,dd or
dd,mm,yy
according to SDF setting
mm,dd,yy or yy,mm,dd or
dd,mm,yy
according to SDF setting
mm,dd,yy or yy,mm,dd or
dd,mm,yy
according to SDF setting
0=yy,mm,dd, 1=mm,dd,yy,
2=dd,mm,yy
hh,mm (24hr)
hh,mm,AM or hh,mm,PM (12hr)
according to STF setting
0=12hr, 1=24hr
0 - 9999999
1= On, 0=Off
0=AUTO, 1=MANUAL, 2=OFF
1=FAIL, 0=ALL
1= On, 0=Off
1= On, 0=Off
65