Axminster AC1950B Original Instructions Manual page 22

Setting Up the Saw
Note: When setting the lower blade guides you may find it
easier to remove the table to gain better access.
5) Remove the lower blade guide guard and place safely aside,
see fig 58-59.
Fig 58-59
6) Set the fore and aft position on the guide assembly, as
described in step 2 on page 21. Loosen the Hex screw on the
lower guide assembly for models AC2305B, AC2606B, see fig 60.
Loosen the bolt to the under side of the bottom wheel housing
for model AC1950B, see fig 61. Note you may need to remove
the lower wheel brush to gain access to the bolt, see fig 62.
Once complete secure the assembly.
Fig 60-61-62
Hex screw
Guide assembly bolt
7) Repeat steps 3 and 4 on page 21 for setting the thrust
bearing and ceramic blade guides, see figs 63-64.
22
Wheel brush
Fig 63-64-65-66