Tuning - Sharp CD-DP900E Operation Manual

Listening to the radio

Tuning

1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING/TIME ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the de-
sired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
Notes:


When radio interference occurs, auto scan tuning may stop automatically at
that point.


Auto scan tuning will skip weak signal stations.


To stop the auto tuning, press the TUNING/TIME button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.


" " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator


If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
02/1/8 CD-DP900E(UK)_2.fm
CD-DP900E
19
Sound control (See page 14.)