Tuning; Listening To The Radio - Sharp CD-E100H Operation Manual

Listening to the radio

Tuning

T
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
z
automatically at that point.
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING button again.
z
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
z
FM stereo mode indicator
FM stereo receiving indicator
If the FM reception is weak, press the TUNER (BAND) button to
z
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
03/1/21 08-CD-E100H(H)E2.fm
CD-E100H
ENGLISH
8
E-16