Repeat Play; Random Play; Programmed Play - Sharp CD-DP900E Operation Manual

Listening to a CD (CDs) (continued)
CD-DP900E

Repeat play

All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the / ( ) button twice.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section and then press the
button twice.
To cancel repeat play:
Press the / ( ) button again.
" " will go out.

Random play

The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random play.
To cancel random play:
Press the button.
Notes:


If you press the / button during random play, you can move to the track selected
next by the random operation. On the other hand, the
to move to the previous track. The beginning of the track being played will be located.


In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
wise, the disc(s) will play continuously.
18

Programmed play

You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press the
DISC SKIP button to select the de-
sired disc.
2
Press the
select the desired track.
You can also select a track by pressing the
/ ( )
remote control.
3
Press the MEMORY/SET (MEMORY) button to save the track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
5
Press the
To clear the programmed selections:
Press the CLEAR button on the remote control whilst the
"MEMORY" indicator is lit.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed. When all the
tracks are cleared, "MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow
/ button does not allow you
steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the original programme.
Notes:


Opening the disc tray automatically cancels the programmed sequence.


Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
(CD ) button. Other-


During programme operation, random play is not possible.
Selected disc number
/ or / button to
Selected track number
/ or /
/ ( ) button to start playback.
02/1/8 CD-DP900E(UK)_2.fm
button on the
Playback order