Unattended Installation; Installation Results - Mellanox Technologies ConnectX-5 User Manual

4.2.3.2 Unattended Installation

The following is an example of an unattended installation session.
Open a CMD console-> Click Start-> Task Manager File-> Run new task-> and enter CMD.
Step 1.
Install the driver. Run:
Step 2.
MLNX_WinOF2-1_10_<revision_version>_All_x64.exe /S /v/qn
[Optional] Manually configure your setup to contain the logs option:
Step 3.
MLNX_WinOF2-1_10_All_x64.exe /S /v/qn /v"/l*vx [LogFile]"
[Optional] if you want to control whether to install ND provider or not
Step 4.
MLNX_WinOF2-1_10_All_x64.exe /vMT_NDPROPERTY=1
[Optional] If you do not wish to upgrade your firmware version
Step 5.
MLNX_WinOF2-1_10_All_x64.exe /vMT_SKIPFWUPGRD=1

4.2.4 Installation Results

Upon installation completion, you can verify the successful addition of the network card(s)
through the Device Manager.
Upon installation completion, the inf files can be located at:
• %ProgramFiles%\Mellanox\MLNX_WinOF2\Drivers\<OS>
To see the Mellanox network adapters, display the Device Manager and pull down the "Network
adapters" menu.
1. MT_NDPROPERTY default value is True
2. MT_SKIPFWUPGRD default value is False
Rev 1.5
If no reboot options are specified, the installer restarts the computer whenever necessary without
displaying any prompt or warning to the user.
Use the or
/norestart /forcerestart
Applications that hold the driver files (such as ND applications) will be closed during the unat-
tended installation.
Mellanox Technologies
standard command-line options to control reboots.
2
.
Driver Installation
1
.
45