Appendix B Safety Warnings - Mellanox Technologies ConnectX-5 User Manual

Appendix B:
1. Installation Instructions
Read all installation instructions before connecting the equipment to the power source.
2. Over-temperature
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 55°C (131°F).
To guarantee proper air flow, allow at least 8cm (3 inches) of clearance around the ven-
tilation openings.
3. During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
4. Copper Cable Connecting/Disconnecting
Some copper cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for spe-
cial warnings and instructions.
5. Equipment Installation
This equipment should be installed, replaced, or serviced only by trained and qualified
personnel.
6. Equipment Disposal
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
7. Local and National Electrical Codes
This equipment should be installed in compliance with local and national electrical
codes.
Rev 1.5
Safety Warnings
Mellanox Technologies 66