Detecting The Input Source Automatically; Selecting A Background Image - Sharp Notevision PG-M15X Operation Manual

Detecting the Input Source Automatically

Projector
1,5
Remote control
(GUI) On-screen Display
Lamp Timer
Picture
Keystone
Fine Sync
AV Mute Disp.
OSD Display
Options
Auto Power Off
Language
Auto Source
PRJ Mode
Background
END SELECT
Selecting a
Projector
1,5
Remote control
(GUI) On-screen Display
Lamp Timer
Picture
Keystone
Fine Sync
AV Mute Disp.
OSD Display
Options
Auto Power Off
Language
Auto Source
PRJ Mode
Background
END SELECT
2,3,4 2,3,4
100
0
ON
ON
ON
ON
OFF
BACK ENTER
Background
2,3,4 2,3,4
100
0
ON
ON
ON
ON
Blue
None
BACK ENTER
This function is used to detect the input source
automatically.
Description of Auto Source
Selected item Description
• Automatically selects the input source
connected to the projector.
• If the signal stops, automatically switches to an
ON
input source that is transmitting a signal.
• For multiple signal input, can skip the input
source that has no input signal and selects the
one that has a signal.
• Manually select the input source connected to
OFF
the projector.
1 Press MENU.
2 Press ∂/ƒ to select "Options", and then press
ENTER.
3 Press ∂/ƒ to select "Auto Source", and then
press ENTER.
4 Press ∂/ƒ to select "ON" or "OFF", and then
press ENTER.
5 To exit from the GUI, press MENU.
• When set to "ON", you will be unable to manually select an
inactive input by pressing INPUT.
Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
Selected item Description
Blue Blue screen
Black screen
None
1 Press MENU.
2 Press ∂/ƒ to select "Options", and then press
ENTER.
3 Press ∂/ƒ to select "Background", and then
press ENTER.
4 Press ∂/ƒ to select "Blue" or "None", and then
press ENTER.
5 To exit from the GUI, press MENU.
43