Configuring Wireless Security On The Emg2881-T20A - ZyXEL Communications EMG2881-T20A User Manual

4.3.1 Configuring Wireless Security on the EMG2881-T20A

This section shows you how to configure wireless security settings with the following parameters on your
EMG2881-T20A.
Frequency Band
SSID
Channel
Security
Follow the steps below to configure the wireless settings on your EMG2881-T20A.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Go to the Configuration > Wireless > Wireless screen to enable the 2.4 GHz wireless network.
1
Enter SSID_Example as the SSID and select Auto Channel Selection to have the EMG2881-T20A scans for
2
and select an available channel automatically.
Set security mode to WPA2-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field.
3
Select WPA-PSK Compatible to allow wireless devices using WPA-PSK security mode to connect to the
EMG2881-T20A. Click Apply.
Chapter 4 Tutorials
2.4 GHz
SSID_Example
Auto
WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
EMG2881-T20A User's Guide
27
Section 2.2 on page 16).