Selecting The On-Screen Display Language; Selecting The Video Input System Mode (Input 3 (Video) Mode Only) - Sharp Notevision PG-C30XU Operation Manual

Selecting the On-screen Display Language

Projector
(GUI) On-screen Display

Selecting the Video Input System Mode (INPUT 3 (VIDEO) mode only)

Projector
(GUI) On-screen Display
E-25
Remote control
1, 5
2, 3
4
Remote control
1, 6
2, 3, 4
5
English is the preset language for the On-screen
Display. The language can be set to English, German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Language".
3 Press ∂/ƒ to select the desired language .
4 Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5 To exit from the GUI, press MENU.
The video input system mode is preset to "Auto";
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options".
3 Press ∂/ƒ to select "Video System", and then
press ©.
4 Press ∂/ƒ to select the desired video system
mode.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• When the system mode is set to "Auto", you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
MOUSE ADJ.
MOUSE ADJ.