Resize Button; Picture Display Mode; Switching The Picture Display Mode - Sharp Notevision PG-A20X Operation Manual

Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose "NORMAL", "DOT BY DOT",
"BORDER" or "STRETCH" image.
Switching the Picture Dis-
play Mode
Press .
• Pressing
changes the display as shown on
pages 40 and 41.
• To return to the standard image, press
"RESIZE" is displayed on the screen.
COMPUTER
4:3 aspect ratio
Other aspect ratios
Input Signal
Computer
Resolution
lower than
XGA
XGA
Resolution
higher than
XGA
SXGA (1280 × 1024)
1280 × 720
*
Mode for projecting an image with the original aspect ratio without cutting any portions.
-40
PG-A20X_E_PDF_P40_50.p65
while
NORMAL
SVGA (800 × 600)
XGA (1024 × 768)
1024 × 768
SXGA (1280 × 960)
SXGA+ (1400 × 1050)
SXGA (1280 × 1024) 960 × 768
1280 × 720
—
NORMAL
Projects a full screen
image while maintaining
Image type
the aspect ratio.
*
4:3 aspect ratio
*
4:3 aspect ratio
*
4:3 aspect ratio
*
5:4 aspect ratio
16:9 aspect ratio
40
UNDO
button
DOT BY DOT BORDER
800 × 600
—
768 × 576
1280 × 960
1400 × 1050
1280 × 1024 720 × 576
— —
Output screen image
DOT BY DOT BORDER
Projects the original Projects 4:3 image fully
resolution signal in STRETCH (the following
of the image. column) image.
* *
*
*
*
: Cutout area on which images cannot be projected.
: Area where the signals are off screen.
03.4.23, 9:58 AM
RESIZE
button
STRETCH
1024 × 576
960 × 576
1024 × 576
STRETCH
Projects 16:9 image
evenly over entire screen
(top/bottom blank bands).
*