Picture Adjustment
You can adjust the projector's picture to your preferences using the "Picture" menu. For
operation of the menu screen, see pages
Example: "Picture" screen menu for
INPUT 1 (RGB) mode
Adjusting the Image
Select the item on the "Picture" menu and
adjust the image.
Description of Adjustment Items
Selectable items
Press
Contrast
for less contrast.
Bright
for less brightness.
Color
for less color intensity.
Tint
for making skin tones purplish.
Sharp
for less sharpness.
Red
for weaker red.
Blue
for weaker blue.
Note
• "Color", "Tint" and "Sharp" are not displayed
when selecting INPUT 1 and setting the "Sig-
nal Type" to "RGB" or setting the "Signal Type"
to "Auto" and the input signal is recognized as
an RGB signal.
• "Sharp" can be adjusted when 480
I
580
, 580P, 720P, 1035
detected while "Signal Type" for INPUT 1 is set
to "Component" or set to "Auto" and the input
signal is recognized as a component signal.
• To reset all adjustment items, select "Reset" and
press
.
-36
PG-A20X_E_PDF_P32_39.p65
\
Press
|
for more contrast.
for more brightness.
for more color intensity.
for making skin tones greenish.
for more sharpness.
for stronger red.
for stronger blue.
I
, 480P, 540P,
I
I
or 1080
signals are
36
32
to 35.
CLR Temp
Color Temperature)
Select "CLR Temp" on the "Picture" menu
and the desired color temperature setting.
Description of Color Temperature Settings
Selectable settings
5500K
For lower color temperature for warmer,
reddish incandescent-like images.
6500K
7500K
8500K
9300K
For higher color temperature for cooler, blu-
ish, fluorescent-like images.
10500K
Note
• Values for "CLR Temp" are only approximations.
03.4.23, 9:57 AM
(Adjusting the
Description