Sharp Notevision PG-A10S Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. Notevision PG-A10S
  6. Operation manual
Sharp Notevision PG-A10S Operation Manual

Sharp Notevision PG-A10S Operation Manual

Sharp operation manual lcd projector pg-a10x, pg-a10s
Hide thumbs Also See for Notevision PG-A10S:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

Download this manual See also: Service Manual

SHARP CORPORATION

A10X_A10S#E_Print#H1+4.p65
1
LCD PROJECTOR
Printed in Japan
TINS-A505WJN1
03P02-JWM
03.2.4, 1:59 PM
OPERATION MANUAL
MODEL
PG-A10X
PG-A10S

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Notevision PG-A10S and is the answer not in the manual?

Questions and answers

Related Manuals for Sharp Notevision PG-A10S

Summary of Contents for Sharp Notevision PG-A10S

  • Page 1: Sharp Corporation

    SHARP CORPORATION A10X_A10S#E_Print#H1+4.p65 LCD PROJECTOR Printed in Japan TINS-A505WJN1 03P02-JWM 03.2.4, 1:59 PM OPERATION MANUAL MODEL PG-A10X PG-A10S...
  • Page 2 IMPORTANT For your assistance in reporting the loss or theft of your Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied accessories”...
  • Page 3 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked above, which is also indicated on the pin face of the plug, must be used.
  • Page 4 The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese) and Korean. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederländisch, Portugiesisch, Chinesisch (Traditionelles Chinesisch und einfaches Chinesisch) und Koreanisch.
  • Page 5 2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.

  • Page 6: Product Disposal

    DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LA VIS. L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE. NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-PGA10X//1. RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.

  • Page 7: Outstanding Features

    Outstanding Features 1. Light and Compact Design • A4 / letter size projector weighing only 2.9 kg / 6.4 lbs can be easily transported from room to room or location to location. 2. Comfortable Operation, Classroom and Meeting Room Friendly •...

  • Page 8: Table Of Contents

    Contents Introduction Outstanding Features ... 3 Contents ... 4 IMPORTANT SAFEGUARDS ... 6 How to Access the PDF Operation Manuals ... 9 Part Names ... 10 Projector (Front and Top View) ... 10 Projector (Rear View) ... 11 Remote Control (Front View) ... 12 Using the Remote Control ...
  • Page 9 Connecting Pin Assignments ... 60 RS-232C Specifications and Command Settings ... 61 Computer Compatibility Chart ... 62 Troubleshooting ... 63 For SHARP Assistance ... 65 Specifications ... 66 Dimensions ... 67 Glossary ... 68 Index ... 69 This operation manual includes “Introduction”, “IMPORTANT SAFEGUARDS”...

  • Page 10: Important Safeguards

    IMPORTANT SAFEGUARDS CAUTION : Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS.
  • Page 11 18. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product.

  • Page 12: Be Sure To Read The Following Safeguards When Setting Up Your Projector

    Caution concerning the setup of the projector I For minimal servicing and to maintain high image qual- ity, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the lens must be cleaned more often.

  • Page 13: How To Access The Pdf Operation Manuals

    How to Access the PDF Operation Manuals PDF operation manuals in several languages are included in the CD-ROM, so that you can work with the projector, even if you do not have this manual. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can install it from the CD-ROM.

  • Page 14: Part Names

    Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top View) Power indicator Illuminates red when the projector is in standby. When the power is turned on, this indicator will illuminate green.

  • Page 15: Projector (Rear View)

    Projector (Rear View) INPUT 1 terminal Terminal for computer RGB and component signals. RS-232C terminal For controlling the projector using a computer. Kensington Security Standard connector Using the Kensington Lock • This projector Kensington Security Stan- dard connector for use with a Kensington MicroSaver Security System.

  • Page 16: Remote Control (Front View)

    Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Remote Control (Front View) Power ON/OFF buttons For turning the power on or off. KEYSTONE button For entering the Keystone Correction mode. UNDO button For undoing an operation or returning to the previous display.

  • Page 17: Using The Remote Control

    Using the Remote Control Usable Range I The remote control can be used to control the projector within the ranges shown in the illustration. Note • The signal from the remote control can be re- flected off a screen for easy operation. How- ever, the effective distance of the signal may differ depending on the screen material.

  • Page 18: Accessories

    I RS-232C serial control cable (32'10" (10.0 m)) I Remote receiver Note • Some of the cables may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. A10X_A10S#E_Print#p06_14.p65 Two R-6 batteries (“AA”...

  • Page 19: Connecting The Projector To Other Devices

    Connecting the Projector to Other Devices Before Connecting Note • Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, be sure that it is the last device to be turned on after all the connections are made.

  • Page 20: Connecting The Projector To A Computer

    To input an audio signal, connect the projector to the computer using a ø3.5 mm audio cable (commer- cially available or available as Sharp service part QCNWGA013WJPZ). Note • When connecting the projector to a com- puter in this way, select “RGB” for “Signal Type”...
  • Page 21 “Plug and Play” function (when connecting to a 15-pin terminal) I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. I Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

  • Page 22: Connecting To Video Equipment

    Connecting the Projector to Other Devices Connecting to Video Equipment Connecting to Video Equipment Using an S-video, a Composite Video or an Audio Cable Using an S-video, video, or audio cable, a VCR, laser disc player or other audio-visual equipment can be connected to INPUT 2, INPUT 3 and AU- DIO input terminals.

  • Page 23: Connecting To Component Video Equipment

    Connecting to Component Video Equipment Use a 3 RCA to 15-pin D-sub cable when con- necting to the INPUT 1 terminal, component video equipment such as DVD players and DTV decoders. DTV is the umbrella term used to describe the new digital television system in the United States.

  • Page 24: Controlling The Projector Using A Computer

    Connecting the Projector to Other Devices Controlling the Projector Using a Computer Connecting to a Computer Using a DIN-D- sub RS-232C Adaptor and an RS-232C Serial Control Cable When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS- 232C adaptor and an RS-232C serial control cable (cross type, sold separately), the com- puter can be used to control the projector and...

  • Page 25: Foot Release

    Setup Using the Adjustment Feet The height of the projector can be adjusted us- ing the adjustment feet at the front and rear of the projector when the surface the projector is placed on is uneven or when the screen is slanted.

  • Page 26: Focus Ring

    Setup Adjusting the Lens The image is focused and adjusted to the de- sired size using the focus ring or zoom knob on the projector. Adjust the focus by rotating the focus ring. Adjust zooming by moving the zoom knob. A10X_A10S#E_Print#p21_25.p65 Focus ring Zoom knob...

  • Page 27: Setting Up The Screen

    Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

  • Page 28: Screen Size And Projection Distance

    Setup Screen Size and Projection Distance Screen L:Projection distance NORMAL Mode (4:3) Picture (Screen) size Diag. ( χ ) Width Height 300" (762 cm) 240" (610 cm) 180" (457 cm) 38' 9" (11.8 m) 250" (635 cm) 200" (508 cm) 150" (381 cm) 32' 2"...

  • Page 29: Ceiling-Mount Setup

    Ceiling-mount Setup I It is recommended that you use the optional Sharp ceiling- mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately.)

  • Page 30: Volume Buttons

    Image Projection Basic Procedure Connect the required external equipment to the pro- jector before carrying out the following procedures. Info • The language preset at the factory is English. If you want to change the on-screen display to another language, reset the language accord- ing to the procedure on page 28.
  • Page 31 Press remote control to select the IN- PUT mode. • After pressing once on the projector, to select the desired input mode. Note • When no signal is received, “NO SIG- NAL” will be displayed. When a signal that the projector is not preset to re- ceive is received, “NOT REG.”...

  • Page 32: Selecting The On-Screen Display Language

    Image Projection Press on the projector or on the remote control, then press that button again while the confirmation message is dis- played, to turn off the projector. Note • If you accidentally pressed and do not want to turn off the power, wait until the confirmation message disappears.

  • Page 33: Keystone Correction (Correcting Trapezoidal Distortion)

    Keystone Correction (Correcting Trapezoidal Distortion) Correcting Trapezoidal Distortion This function allows for Keystone (On-screen Trapezoidal Distortion) Correction. Note • When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally.

  • Page 34: Menu Items

    Signal Info Note • In the “Picture” menu of INPUT 1, “Color”, “Tint” and “Sharp” are only displayed when “Signal Type” is set to “Component”. • In the “Picture” menu of INPUT 1, “sRGB” is only displayed when “Signal Type” is set to “RGB”.
  • Page 35 I INPUT 2 / 3 Mode Main menu −30 Picture Contrast Page 36 −30 Bright −30 Color −30 Tint −30 Sharp −30 −30 Blue Reset CLR Temp Gamma Memory Options Lamp Timer (Life) Page 44 OSD Display [ON/OFF] Video System...

  • Page 36: Using The Menu Screen

    Using the Menu Screen The menu screens allow you to adjust the image and various projector settings. You can operate the menus from the remote control using the following procedure. Example: “Picture” menu screen for INPUT 1 (RGB) mode Menu Selections (Adjustments) Press •...
  • Page 37 Press ' ' ' or " " " " " to select the item you want to adjust. • The selected item is highlighted. Note • To display a single adjustment item, press after selecting the item. Only the selected adjustment item will be displayed.

  • Page 38: Enter Button

    Using the Menu Screen Menu Selections (Settings) Press • The “Picture” menu screen for the se- lected input mode is displayed. Note • The on-screen display shown on the right is displayed when INPUT 1 (RGB) mode is selected. Press \ \ \ \ \ or | | | | | to display the other menu screens.
  • Page 39 Press ' ' ' or " " " " " to select the item you want to set, and then press | | | | | to display the sub menu. • The selected item is highlighted. Note • Press or \ to return to the pre- vious screen.

  • Page 40: Picture Adjustment

    Blue for weaker blue. Note • “Color”, “Tint” and “Sharp” are not displayed when selecting INPUT 1 and setting the “Sig- nal Type” to “RGB”. • “Sharp” can be adjusted when 480 , 580P, 720P, 1035 or 1080 detected while “Signal Type”...

  • Page 41: Gamma (Gamma Correction)

    Gamma (Gamma Correction) Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the bright- ness of the brighter portions. When you are displaying images with frequent dark scenes, such as a film or concert, or when you are displaying images in a bright room, this feature makes the dark scenes easier to see and gives the...

  • Page 42: Signal Info (Checking The Input Signal)

    Computer Image Adjustment Using the “Fine Sync” menu, you can adjust the computer image, match the computer dis- play mode, and check the input signal. For operation of the menu screen, see pages Example: “Fine Sync” menu screen for INPUT 1 mode Adjusting the Computer Image In case of irregularities such as vertical stripes or...

  • Page 43: Signal Info (Checking The Input Signal)

    Signal Info (Checking the Input Signal) Select “Signal Info” on the “Fine Sync” menu to check the current input signal informa- tion. Note • The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video.

  • Page 44: Resize Button

    SXGA (1280 × 960) SXGA+ (1400 × 1050) SXGA (1280 × 1024) Other aspect ratios 1280 × 720 Input Signal Computer Image type PG-A10X PG-A10S Resolution Resolution lower than lower than SVGA 4:3 aspect ratio SVGA 4:3 aspect ratio Resolution...
  • Page 45 : Cutout area on which images cannot be projected. : Area on which the image is not included in the original signals. A10X_A10S#E_Print#p40_50.p65 NORMAL BORDER PG-A10X PG-A10X PG-A10X PG-A10S 1024 × 768 800 × 600 768 × 576 600 × 450 — — —...

  • Page 46: Still And Zoom Image

    Still and Zoom Image You can instantly freeze a moving image and enlarge a specific portion of an image with the remote control. Using these functions, you can explain the image to the audience more effec- tively. UNDO button Freezing a Moving Image Press •...

  • Page 47: Keylock Function

    Keylock Function Use this function to lock the operation buttons on the projector. Locking the Operation Buttons Hold down on the projector for about 3 seconds while the projector is being turned on. Note • The keylock function does not affect the opera- tion with the remote control buttons.

  • Page 48: Using The "Options" Menu

    • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. • The table above indicates rough estimates in the case of using only in each mode shown. Remain-...

  • Page 49: Video System (Setting The Video System)

    Description of Background Images Selectable settings Sharp SHARP default image Blue Blue screen None Black screen Note • If the input signal has interference, the screen will be displayed during interference.

  • Page 50: Auto Power Off (Auto Power Off Function)

    Using the “Options” Menu Example: “Options” menu screen for INPUT 2 (S-Video) mode Auto Power Off Power Off Function) When no input signal is detected for more than 15 minutes, the projector will automatically power off if set to “ON”. The Auto Power Off function will be disabled if it has been set to “OFF”.

  • Page 51: Password (Setting A Password)

    Theft” function is set. If you forget your pass- word while the “Anti-Theft” function is activated, you will need to contact your nearest Sharp Au- thorized Projector Dealer or Service Center (see page 65). You may need to bring your projector to them to restore the projector to original fac- tory condition (password and keycode reset).

  • Page 52: Anti-Theft (Setting The Anti-Theft)

    If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Service Cen- ter (see page 65). You may need to bring your pro- jector to them to restore the projector to original factory condition (password and keycode reset).
  • Page 53 If you want to change the keycode, follow the procedure below. Note • When “Anti-Theft” is selected, the password in- put box will appear. After the password has been entered, you can change the keycode. Press the buttons on the remote control or the projector to enter the preset 4-digit keycode in “Old Code”.

  • Page 54: Reversing/Inverting Projected Images

    Reversing/Inverting Projected Images You can reverse or invert the projected image for various applications using the “PRJ Mode” menu. For operation of the menu screen, see pages 32 to 35. Example: “PRJ Mode” menu screen for INPUT 1 (RGB) mode Setting the Projection Mode Display the “PRJ Mode”...

  • Page 55: Carrying The Projector

    Carrying the Projector How to Use the Carrying Case When carrying the projector, attach the lens cap to the lens, and place it in the supplied carrying case. Open the cover of the carrying case. Remove the inner padding from the carrying case, and fold it in the direction of the arrows.

  • Page 56: Maintenance

    Maintenance Cleaning the projector I Be sure to unplug the power cord before clean- ing the projector. I The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the finish on the cabinet. I Do not use volatile agents such as insecticides on the projector.

  • Page 57: Replacing The Air Filter

    100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Ask your nearest Sharp Authorized Pro- jector Dealer or Service Center to ex- change the filter (PFILDA008WJZZ) when it is no longer possible to clean.

  • Page 58: Clean The Air Filter

    Replacing the Air Filter Clean the air filter. • Clean the dust off the air filter and cover with a vacuum cleaner extension hose. Replace the air filter. • Place the air filter underneath the tabs on the filter/lamp unit cover. Replace the filter/lamp unit cover.

  • Page 59: Maintenance Indicators

    ” will change to “ ” (red), Possible Solution • Relocate the projector to an area with proper ventilation. Sharp Authorized Projector Dealer or Service Center (see page 65) for repair. page 58) Sharp Authorized Projector Dealer or Service Center (see page 65) for repair.
  • Page 60 Maintenance Indicators Info • If the temperature warning indicator illuminates, and the power turns off, follow the above possible solutions and then wait until the projector has cooled down completely before plugging in the power cord and turning the power back on. (At least 5 minutes.) •...

  • Page 61: Regarding The Lamp

    • Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before removing the lamp unit. I If the new lamp does not light after replacement, take your projector to the nearest Sharp Autho- rized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQC- PGA10X//1 from your nearest Sharp Authorized Projector Dealer or Service Center.

  • Page 62: Removing And Installing The Lamp Unit

    Regarding the Lamp Removing and Installing the Lamp Unit Info • Be sure to remove the lamp unit using the handle. Be sure not to touch the glass sur- face of the lamp unit or the inside of the projector. •...

  • Page 63: Resetting The Lamp Timer

    Remove the lamp unit. • Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it. Insert the new lamp unit.

  • Page 64: Connecting Pin Assignments

    Connecting Pin Assignments INPUT 1 RGB Signal Terminal: 15-pin Mini D-sub female connector RS-232C Terminal: 9-pin Mini DIN female connector 9-pin D-sub male connector of the DIN-D-sub RS-232C adaptor RS-232C Cable recommended connection: 9-pin D-sub female connector Note • Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the controlling device (e.g.

  • Page 65: Rs-232C Specifications And Command Settings

    RS-232C Specifications and Command Settings PC control A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type, sold separately) to the projector. (See page 20 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.

  • Page 66: Computer Compatibility Chart

    Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 15–70 kHz, Vertical Frequency: 43–85 Hz, Pixel Clock: 12–108 MHz • Compatible with sync on green and composite sync signals • SXGA+ and SXGA compatible in intelligent compression • Intelligent Compression and Expansion System resizing technology The following is a list of modes that conform to VESA.

  • Page 67: Troubleshooting

    Troubleshooting Problem • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • The AV MUTE function is working. • Cables incorrectly connected to rear panel of the projector. •...
  • Page 68 Troubleshooting Problem • Change the input signal type setting. Picture is green on INPUT 1 COMPONENT. Picture is pink (no green) on INPUT 1 RGB. • The lamp replacement indicator is illuminating in red. Replace Picture is dark. • Picture adjustments are incorrectly set. Picture is too bright and whitish.

  • Page 69: For Sharp Assistance

    If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting” section on pages 63 and 64. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A.

  • Page 70: Specifications

    This SHARP projector uses an LCD (Liquid Crystal Display) panel. This very sophisticated panel contains 786,432 (PG- A10X) / 480,000 (PG-A10S) pixels (× RGB) TFTs (Thin Film Transistors). As with any high technology electronic equip- ment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.

  • Page 71: Dimensions

    Dimensions Units: inches (mm) Side View Front View Bottom View A10X_A10S#E_Print#p63_70.p65 Rear View Top View (297) ø 66 (258.8) (48.5) (169) (148.5) (195) Side View (79.5) (19.1) 03.2.4, 2:07 PM...

  • Page 72: Clr Temp (Color Temperature)

    Glossary Anti-Theft If the “Keycode” set in the projector is not correctly entered, the projector will not operate even if sig- nals are entered. Aspect Ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect ratio of 16:9 and 21:9.

  • Page 73: Index

    Remote control sensor ... 13 Replacing the lamp ... 57 RESIZE button ... 40 RGB cable ... 16 RS-232C terminal ... 20 Sharp ... 36 Signal Info ... 39 Signal Type ... 37 Special Modes ... 38 sRGB ... 37 STRETCH ...
  • Page 74 MEMO A10X_A10S#E_Print#p63_70.p65 03.2.4, 2:07 PM...

  • Page 75: Deutsch

    Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung des Projektors sorgfältig durch. Einführung Es gibt zwei wichtige Gründe für die baldige Garantie-Registrierung dieses neuen Projektors von SHARP mit Hilfe der dem Projektor beiliegenden REGISTRIERUNGS-KARTE: 1. GARANTIE Hierdurch wird sichergestellt, dass Sie sofort den vollständigen Anspruch auf die Garantie auf Bauteile, Service und Personalkosten dieses Gerätes haben.

  • Page 76: Wichtige Sicherheitshinweise

    WICHTIGE SICHERHEITSHINWEISE ACHTUNG : Vor der ersten Inbetriebnahme dieses Gerätes sollten Sie diese Bedienungsanleitung durchlesen und für die Bezugnahme gut aufbewahren. Elektrische Energie kann viele nützliche Funktionen ausführen. Dieses Gerät wurde so konstruiert, dass es die Sicherheit von Personen gewährleistet. FALSCHE VERWENDUNG KANN ZU ELEKTRISCHEN SCHLÄGEN ODER ZU EINEM BRAND FÜHREN.
  • Page 77 Wenn der Projektor regelmäßig gereinigt wird, wird die Betriebsdauer bei Verwendung des Gerätes in einer solchen Umgebung nicht reduziert. Eine interne Gerätereinigung darf nur von einem von SHARP autorisierten Händler für Projektoren oder vom Kundendienst durchgeführt werden. Stellen Sie den Projektor nicht dort auf, wo er direktem Sonnenlicht oder hellem Licht ausgesetzt ist.

  • Page 78: Zugriff Auf Die Pdf-Bedienungsanleitungen

    Zugriff auf die PDF-Bedienungsanleitungen Die CD-ROM beinhaltet Bedienungsanleitungen im PDF-Format in mehreren Sprachen, damit Sie auch dann mit dem Projektor arbeiten können, wenn Sie dieses Handbuch nicht vorliegen haben. Zur Verwendung dieser Anleitungen muss der Adobe Acrobat Reader auf Ihrem PC (Windows oder Macintosh) installiert sein.

  • Page 79: Français

    Vous serez promptement informé de toute question concernant la sécurité, de toute modification nécessaire et de tout rappel en usine que SHARP serait tenu d’offrir dans le cadre de l’Acte de 1972 sur la sécurité de l’utilisateur d’un produit. VEUILLEZ LIRE ATTENTIVEMENT LE PARAGRAPHE IMPORTANT “GARANTIE LIMITÉE”.

  • Page 80: Mesures De Sécurité Importantes

    MESURES DE SÉCURITÉ IMPORTANTES ATTENTION : Veuillez lire toutes ces instructions avant de faire fonctionner ce produit et les conserver pour toutes consultations ultérieures. L’électricité peut être utilisée pour beaucoup de fonctions utiles. Ce produit a été conçu et fabriqué pour assurer une utilisation en toute sécurité.
  • Page 81 Précautions concernant la mise en route du projecteur I Pour réduire l’entretien au minimum et maintenir une haute qualité d’image, SHARP recommande que ce projecteur soit installé dans un endroit à l’abri de l’humidité, de la poussière et de la fumée de cigarette. Lorsque le projecteur est exposé...

  • Page 82: Comment Accéder Aux Modes D'emploi Pdf

    Comment accéder aux modes d’emploi PDF Les manuels techniques au format PDF et en plusieurs langues sont inclus dans le CD-ROM afin que vous puissiez travailler avec le projecteur même si vous ne possédez pas ce manuel. Pour utiliser ces manuels, le progamme Adobe Acrobat Reader doit être installé...

  • Page 83: Svenska

    Läs noga denna bruksanvisning innan projektorn tas i bruk. Introduktion Det finns två viktiga anledningar till att snabbt registrera garantin för din SHARP-projektor med hjälp av registreringskortet som medföljer projektorn. 1. GARANTI Denna är till för att försäkra att du erhåller alla förmåner ifråga om reservdelar, service och arbete som garanteras för enheten vid inköpet.

  • Page 84: Viktiga Säkerhetsföreskrifter

    VIKTIGA SÄKERHETSFÖRESKRIFTER OBSERVERA : Läs dessa föreskrifter innan du använder produkten för första gången och spara dem för framtida bruk. Man kan använda elektricitet till många praktiska saker. Denna produkt har utvecklats och tillverkats för att kunna säkerställa din personliga säkerhet. FELAKTIG HANTERING KAN MEDFÖRA RISK FÖR ELEKTRISKA STÖTAR ELLER BRAND. För att inte sätta de säkerhetsanordningar som byggts in i denna produkt ur spel, måste följande grundregler beaktas vid installation, användning och underhåll.
  • Page 85 Observera angående projektorns uppställning I För att reducera behovet för servicearbete och försäkra en fortsatt hög bildkvalitet rekommenderar SHARP att projektorn installeras på ett ställe som ej utsätts för fukt, damm och cigarrettrök. Objektivet måste rengöras oftare om projektorn används i en sådan miljö.

  • Page 86: Hur Du Läser Pdf-Bruksanvisningarna

    Hur du läser PDF-bruksanvisningarna På CD-ROM-skivan finns bruksanvisningar i PDF-format på flera olika språk så att du kan använda projektorn även om du inte har denna bruksanvisning. För att kunna använda dessa anvisningar måste du installera Adobe Acrobat Reader i din persondator (Windows eller Macintosh). Om du inte redan har installerat Acrobat Reader, kan du göra det från CD-ROM-skivan.

  • Page 87: Español

    Para asegurar que usted reciba rápidamente cualquier aviso de inspección de seguridad, modificación o retirada del mercado que SHARP tenga que llevar a cabo cumpliendo con el Acta de Seguridad de Productos del Consumidor, bajo de la ley 1972 LEA CON ATENCIÓN LA IMPORTANTE CLÁUSULA DE “GARANTÍA LIMITADA”.

  • Page 88: Importantes Medidas De Seguridad

    IMPORTANTES MEDIDAS DE SEGURIDAD PRECAUCIÓN : Lea completamente estas instrucciones antes de usar el producto y consérvelas para poder consultarlas en el futuro. La energía eléctrica puede tener muchas aplicaciones útiles. Este producto ha sido diseñado y fabricado para garantizar la seguridad del usuario. SIN EMBARGO, EL USO INCORRECTO DEL PRODUCTO PUEDE OCASIONAR DESCARGAS ELÉCTRICAS E INCENDIOS.
  • Page 89 Precauciones a tener en cuenta para la instalación del proyector Para minimizar la necesidad de mantenimiento y mantener una alta calidad de imagen, SHARP recomienda instalar este proyector en un lugar que esté libre de humedad, polvo y humo de cigarrillo. Si se instala el proyector en un ambiente expuesto a estas condiciones, será...

  • Page 90: Cómo Acceder A Los Manuales De Manejo En Formato Pdf

    Cómo acceder a los manuales de manejo en formato PDF El CD-ROM incluye los manuales de manejo en varios idiomas en formato PDF, para que pueda utilizar el proyector aunque no tenga el presente manual. Para poder usar estos manuales debe tener instalado Adobe Acrobat Reader en su PC (Windows o Macintosh).

  • Page 91: Introduzione

    La seconda consiste nell’assicurarsi la possibilità di ricevere immediatamente qualunque notifica di sicurezza relativa a controlli, modifiche o ritiri che SHARP sia eventualmente tenuta a fornire ai sensi della legge 1972 sulla sicurezza dei prodotti per i consumatori. LEGGERE ATTENTAMENTE L’IMPORTANTE CLAUSOLA RELATIVA AI “LIMITI DI GARANZIA”.

  • Page 92: Norme Di Sicurezza Importanti

    NORME DI SICUREZZA IMPORTANTI ATTENZIONE : Leggete queste istruzioni prima di usare il prodotto e poi conservate le istruzioni per ogni riferimento futuro. L’energia elettrica può effettuare molte funzioni utili. Questo prodotto è stato prodotto per assicurare la vostra sicurezza personale. MA L’USO ERRATO PUO’ CAUSARE POTENZIALI SCOSSE ELETTRICHE O RISCHI DI INCENDI.
  • Page 93 La pulizia interna va eseguita solo da un rivenditore autorizzato dalla Sharp o presso un centro di servizio. Non installate il proiettore in luoghi dove potrebbe essere esposto alla luce diretta del sole o ad una forte illuminazione.

  • Page 94: Per Accedere Ai Manuali Di Istruzioni Nel Formato Pdf

    Per accedere ai manuali di istruzioni nel formato PDF Nel CD-ROM sono disponibili i manuali d’uso in formato PDF in più lingue, in modo da poter utilizzare il proiettore anche senza questo manuale. Per usare questi manuali, bisogna installare Adobe Acrobat Reader nel PC (Windows o Macintosh). Se non è stato ancora installato Acrobat Reader, è...

  • Page 95: Nederlands

    Lees deze gebruiksaanwijzing zorgvuldig door voordat u de projector in gebruik neemt. Inleiding Er zijn twee belangrijke redenen om de garantie van uw nieuwe SHARP-projector onmiddellijk in orde te brengen met de REGISTRATIEKAART die verpakt zit bij de projector. 1. GARANTIE U komt meteen in aanmerking voor de volledige garantie op onderdelen, service en reparatiewerkzaamheden die van toepassing is op dit product.

  • Page 96: Belangrijke Veiligheidsvoorschriften

    BELANGRIJKE VEILIGHEIDSVOORSCHRIFTEN LET OP : Lees al deze instructies door alvorens dit apparaat in gebruik te nemen en bewaar ze voor later gebruik. Met elektrische energie kunt u heel wat nuttige functies uitvoeren. Dit apparaat is zodanig ontworpen en vervaardigd dat uw persoonlijke veiligheid wordt gevrijwaard.
  • Page 97 Voorzichtig bij het opstellen van de projector I Met het oog op een minimaal onderhoud en het behoud van een hoge beeldkwaliteit beveelt SHARP aan deze projector te installeren in een ruimte die vrij is van vocht, stof en sigarettenrook. Wanneer de projector aan vocht, stof of rook wordt blootgesteld, moet de lens vaker dan normaal worden gereinigd.

  • Page 98: Toegang Krijgen Tot De Pdf-Gebruiksaanwijzingen

    Toegang krijgen tot de PDF-gebruiksaanwijzingen De cd-rom bevat handleidingen in PDF-formaat in verscheidene talen zodat u de projector kunt bedienen, zelfs als u deze handleiding niet tot uw beschikking heeft. Om deze handleiding te kunnen gebruiken, moet eerst Adobe Acrobat Reader op uw PC (Windows of Macintosh) geïnstalleerd zijn.

  • Page 99: Português

    Para assegurar que você receba, prontamente, todas as notificações relativas a segurança, tais como inspeções, modificações ou recolha, que a SHARP poderá ser requerida a executar com base no Estatuto de Segurança para Produtos de Consumo de 1972. RECOMENDA-SE UMA LEITURA CUIDADOSA DA IMPORTANTE CLÁUSULA “GARANTIA LIMITADA”.

  • Page 100: Informações De Segurança

    INFORMAÇÕES DE SEGURANÇA ATENÇÃO : Leia por favor todas estas instruções antes de operar este produto e guarde-as para uso posterior. A energia elétrica pode realizar muitas funções úteis. Este produto foi concebido e fabricado para garantir a sua segurança pessoal. MAS A UTILIZAÇÃO INCORRETA PODERÁ RESULTAR EM POTENCIAL CHOQUE ELÉTRICO OU PERIGO DE INCÊNDIO.
  • Page 101 Cuidados relativos à instalação do projetor I Para um mínimo de assistência e para manter uma elevada qualidade de imagem, a SHARP recomenda que este projetor seja instalado em uma área isenta de umidade, poeira e fumo de tabaco. Caso o projetor seja sujeito a estes ambientes, a lente deverá...

  • Page 102: Como Aceder Os Manuais De Operação Pdf

    Como Aceder os Manuais de Operação PDF O CD-ROM inclui os manuais de operação (em formato PDF) em vários idiomas, para que você possa trabalhar com o projetor, mesmo que você não possua este manual. Para utilizar estes manuais, você precisará instalar Adobe Acrobat Reader no seu PC (Windows ou Macintosh). Mesmo que você...
  • Page 103 MEMO A10X_A10S#Memo_Print#p110.p65 03.2.4, 2:10 PM...

This manual is also suitable for:

Pg-a10s-slNotevision pg-a10x

Table of Contents