Jenn-Air JVR0436H Installation Instructions And Use & Care Manual page 14

3.
Install charcoal filter
Slide the charcoal filter into place on the bracket as shown.
■
Secure the charcoal filter in three locations with the clamps
■
provided as shown.
4.
Install the chimney cover
Slide the chimney cover into the slot over the canopy and
■
adjust the height of the chimney as needed.
Chimney height:
■
Minimum: 38 / " (98.1 cm)
5
8
Maximum: 49 / " (124.8 cm)
1
8
Tip: Ensure the hood is connected electrically and working
before assembling the chimney cover.
14
15-May-2018 14:29:52 EDT | RELEASED
mm
In some European factories the letter "W" of the part code mentioned herein will be automatically
5.
Secure the chimney to bracket
min 38⁵/₈" (98.1 cm)
max 49¹/₈" (124.8 cm)
Fasten the top of the chimney to the filter bracket with the
■
screws provided.
6.
Reinstall grease filter
Install the grease filter back into position.
■
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
mm