Jenn-Air JVR0436H Installation Instructions And Use & Care Manual page 12

9.
Secure with screws
Ø 5 x 45mm
Fasten the hood with 2-5 x 45 mm screws on the top and
■
2-4 x 45 mm screws with flat washers at the bottom as
shown.
Making Electrical Connection
1.
Remove tape
Remove the tape holding the electrical box in the hood.
■
12
15-May-2018 14:29:52 EDT | RELEASED
2 x
Ø 5 x 45mm
2 x
In some European factories the letter "W" of the part code mentioned herein will be automatically
2.
Mount electrical box
Slide the electrical box onto the screws provided and tighten
■
it with a flat head screwdriver.
Tip: Use a manual driver for this operation.
3.
Connect the power cord
Insert the connector into the slot provided on the electrical
■
box.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")