4.
Secure power cord
Using the wire clamp provided, secure the wire as shown.
■
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
5.
Plug into a grounded 3 prong outlet
15-May-2018 14:29:52 EDT | RELEASED
mm
WARNING
In some European factories the letter "W" of the part code mentioned herein will be automatically
Complete Installation
1.
Install plastic transition
.
.
mm
Align the plastic transition to the bottom of the charcoal filter
■
bracket and fasten it with the 2-2.9 x 6.5 mm screws.
2.
Install duct
"
6
(15.2 cm)
Slide the duct into place ensuring it is placed over the
■
exhaust of the hood and over the plastic transition.
Secure in place with the duct clamps.
■
NOTE: Use of flexible duct is recommended.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
13