Continuity Test Function - MasterCraft 052-0726-0 Instruction Manual

13
model no. 052-0726-0 | contact us 1-800-689-9928

CONTINUITY TEST FUNCTION

In Auto Check mode, press the "SELECT" key once to select continu-
ity test function.
Connect the test leads across the circuit to be tested.
If the resistance is more than 150 Ω, the built-in buzzer will not
sound, and the display will show " ".
If the resistance is less than about 50 Ω, the buzzer will sound
continuously and the display will change from " " to
" ".
If the resistance is between 50 Ω and 150 Ω, the buzzer may or may
not sound and the display will change with the buzzer's behavior.
NOTE:
Before test, disconnect all power to the circuit to be tested and
discharge all capacitors thoroughly.