25
model no. 052-0052-2 | contact us 1-800-689-9928
CONTINUITY TEST
1.
2.
3.
4.
5.
NOTE:
Before test, disconnect all power to the circuit to be tested and
discharge all capacitors thoroughly.
Connect the black test lead to the "COM" terminal and the red
test lead to the "INPUT" terminal.
Set the function switch to
Press the
button until the display shows " ".
Connect the test leads across the circuit to be tested.
The display shows the resistance value. If the resistance is less
than about 20 Ω, the built-in buzzer will sound. If the resistance
is between 20 Ω and 150 Ω, the buzzer may or may not sound.
If the resistance is more than 150 Ω, the buzzer will not sound.
/ position.