Bowflex BXE116 Service Manual page 34

8. Insert 2.5" x 10" cardboard between the Flywheel and the Brake
Magnet, and tape the cardboard to the Brake Magnet.
Note: Be sure the cardboard covers all of the Brake Magnet.
Brake Magnet Hardware
Flywheel
9. Pull back on the Brake Arm enough to clear the Motor Pulley Shaft.
Move it to the side and gently allow it to come to rest against the
cardboard on the flywheel.
10. Loosen and remove the Brake Magnet Hardware that attaches the
Brake Assembly to the Main Frame Bracket.
NOTICE: Hold the Brake Assembly so that it does not fall.
Do not crimp the cables
11. Remove the Brake Assembly, and then the cardboard. Discard the old
Brake Assembly.
Brake Magnet
34
Brake
Magnet
Flywheel
Brake Magnet
Brake Arm
Motor Pulley
Shaft
Servo Motor Bracket
Brake Magnet
Hardware
Flywheel
Tension Spring