Table of Contents
Advertisement
MACHINE SETTINGS MODE
The Machine Settings Mode lets you view the total run hours for the machine and the current versions of the main systems.
1.
Hold down the PAUSE/STOP button and Down button together for 3 seconds while in the Power-Up Mode to access the Machine Settings
Mode.
Note: Push PAUSE/STOP to exit the Machine Settings Mode and return to the Power-Up Mode screen.
2.
The Console displays the TOTAL HOURS for the machine.
3. P ush the Right button to go to the next option.
4. T he Console display shows the current Console Firmware Version.
5. P ush the Right button to go to the next option.
6.
The Console display shows the current Motor Control Board Firmware Version.
7. P ush the Right button to go to the next option.
8.
The Console display shows the current BLE Version.
9. P ush the Right button to go to the next option.
10. The Console displays the DISCONNECT BLE NO prompt.
Note: If you want to disconnect the Bluetooth
option, and push Enter. The Console will exit the Machine Settings Mode and return to the Power-Up Mode screen.
11. Push the Right button to go to the next option.
12. The Console displays the VIEW ERROR MSG NO option. This option is for Service Technicians use only.
13. Push the Right button to go to the next option.
14. T he Console displays the RESET CONSOLE NO prompt.
Note: If you want to reset the Console to factory settings, push the Increase/Decrease buttons to select the "RESET CONSOLE YES"
option, and push Enter. Turn the machine off when the Console displays the "POWER CYCLE NOW" prompt.
15. P ush the Right button to exit the Machine Settings Mode and return to the Power-Up Mode screen.
transmitter, push the Increase/Decrease buttons to select the "DISCONNECT BLE YES"
®
16
Hide quick links:
Advertisement
Table of Contents
