To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet
!
and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure
location.
1. Unplug the power cord from the machine and wait 5 minutes.
2. Using a #2 Phillips Screwdriver, remove the 2 indicated screws from the
Rear Cover.
3. Remove the Rear Cover.
4. Using a #2 Phillips screwdriver, remove the 2 indicated screws from the
Motor Cover. Lift up on the front of the Motor Cover, releasing it from the
Base Assembly. Slide the Motor Cover out from beneath the Treadles.
Motor Cover
5. Using a #2 Phillips screwdriver, remove the 3 indicated screws from the
right Pivot Cover.
6. Remove the right Pivot Cover and Spacer.
45