Console Service Mode - Bowflex TreadClimber TC20 Service Manual

Hide thumbs Also See for TreadClimber TC20:
Table of Contents

Advertisement

Console Service Mode

The Console has a Service Mode. Some options in the Service Mode can be adjusted to the users preferences, but most are helpful for
service of the machine. To access the Service Setup Mode, hold down the Increase and Decrease buttons for 2 seconds when in Idle
NOTE: The numbering here does not represent the Menu # in service mode. See Owner's Manual for the 
Mode.
actual Menu number. 
1. Units:  N/A 
Option Display
Option
1
Unit
Units
2. Brightness: N/A 
2
brt
Brightness
3
LOG
Error Log *
3. Error Log: Displays the last 10 error codes.  When entering this menu, It automatically shows the 
4
Con
Console Version *
5
dr
Drive Version *
6
HrS
Total Hours
Description
Select your preferred unit of measurement; "Lb" = English Imperial, "SI" = metric
Control the brightness level of the Console; "20" = maximum intensity, "1" = minimum
Displays the last 10 error codes. When entering this menu, it automatically shows the
latest error code. Pressing the DECREASE button will show you the second to the latest
latest error code.  Pressing the DECREASE button will show you the second to the latest error 
error and so on. Pressing INCREASE will show you the oldest error. The time is refer-
and so on. Pressing INCREASE will show you the oldest error. The time is reference to machine 
ence to machine time/hours.
time/hours 
TC20 
 
4. Console Version: N/A 
5. Drive Version: N/A 
6. Device Usage: Displays the hours‐minutes the system has been used. If a Console is replace
with a fresh (not previously used with 0 statistics on hours/usage) the console will ask the M
Displays the Console software version
for machine hours/usage. If MCB is replaced , Console will sync MCB with the correct machi
Displays the drive software version
hours. 
Displays the hours-minutes the system has been used. If a Console is replaced with
a fresh (not previously used with 0 statistics on hours/usage) the console will ask the
MCB for machine hours/usage. If MCB is replaced, Console will sync MCB with the cor-
rect machine hours.
 
TC10 
TC10 
14
Error Time (Hour)‐ In TIME segment
Error Time (Minute)‐in DISTANCE Segment 
Error Type in CALORIES segment 
Error Number in SPEED segment 
Error Time(Hour) in 
TIME segment 
Error 
Hours in TIME 
Time(Minutes‐in 
segment
SPEED  segment 
Minutes‐in 
DISTANCE segment 
Error Type in CALORIES segment 
Menu # 
Error Number in Go Coach 
segment 
Hours in TIME 
segment
Minutes‐in SPEED 
segment 
 
 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents