3-Thread Rolled Wave Stitch - Baby Lock Acclaim BLES4 Instruction And Reference Manual

3-Thread Rolled Wave Stitch

W
A
1. Turn the Wave/Overlock Selector lever from "OVERLOCK" to "WAVE".
V
2. Cut the threads from the thread cones, raise presser foot and remove threads from the thread
paths.
E
3. Engage the threading lever to threading position. (page 18)
4. Place the right needle thread cone on the second spool pin on left.
5. Slip the right needle thread into the telescopic thread guide directly above the thread. Follow
the left needle threading path down to the right needle.
S
6. Thread the right needle using the needle threader. (page 21)
7. Place the upper looper thread cone on the 2nd from right spool pin.
T
8. Slip the upper looper thread into the telescopic thread guide directly above the thread. Follow
the top threading path for the right needle thread, down the front threading path, through the
I
chrome thread guide, and directly to the "U" threading port for the upper looper. Thread the
upper looper. (page 19)
T
9. Place the right needle thread and upper looper thread under the presser foot and to the back.
10. Place the lower looper thread cone on the first spool pin on right.
C 11. Thread lower looper using the standard lower looper threading technique. (page18)
12. Engage the threading lever to serging position.
13. Set Stitch Selector on "C" for Rolled Wave Stitch.
H
14. Set Stitch Length and Stitch Width following the illustration below.
Note: Recommended settings will vary depending on thread type and fabric.
NEEDLES
right
L
43
LENGTH
0.75-1.5R
R
STITCH
WIDTH
SELECTOR
3.0-5.0
C
WAVE/OVERLOCK
SELECTOR
WAVE