Securing Ends - Baby Lock Acclaim BLES4 Instruction And Reference Manual

Securing Ends (Cont.)
To lock the end of the seam:
1. Take one stitch off the end of the seam. (fig. F)
2. Raise the presser foot and bring the needle(s) to the
highest position. Pull back gently on the fabric to clear
the stitch fingers.
3. Turn the fabric over with the wrong side of the stitch
facing up (fig. G), and reposition it under the presser foot
with the needle at the seam edge, aligned with the
previous needle line. (fig. H)
4. Lower presser foot and sew 5-6 stitches over the
previous stitches, being careful not to cut them. You may
want to turn the cutting blade locking dial clockwise to
the lock position. Pivot the fabric and chain off. (fig. I-J)
B
A
S
I
C
S
F
E
R
G
I
N
G
G
L R
T
E
C
H
H
N
I
Q
U
E
S
I
J
46