Crankcase Cover (Rh) - Yamaha JT1 Series Service Manual

B In sta!l the flywheel magneto puller
Then tighten the bolt. The flvvvheel magneto will
break loose. (left-hand thread)
(Nut: 17 mm)
C Remove the two screws holding the flywheel mag-
neto base to the crankcase, and remove the fly-
wheel magneto base
D Remove the woodruff key,
It is advisable to place the woodruff key on the
flywheel magnets (using its magnetic force) while
the key is removed for engm e service
This
will
keep it from becoming lost
(0Screw driver, hammer)
3-8 Crankcase Cover (R.H.)
A Removal
1) Remove the kick crank mounting bolt and the
crank.
(10
mm)
ENGINE· Flywheel Magneto, Crankcase Cover
Fig 3-7-2
Fig 3-7-3
Fig 3-7-4
Fig 3-8-1
- 2 1 -