General Control - Sharp DK-A10, DK-A10BK Operation Manual

General control

DK-A10
DK-A10BK
VOL
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
Press the SNOOZE/DIMMER button to adjust the brightness of the
display and LED.
FL and LED off
FL and LED dim
FL and LED light on
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
12
SNOOZE/
SNOOZE/
FUNCTION CLOCK
DIMMER DIMMER
VOL
SLEEP ALARM
FOLDER DISPLAY
E SOUND
PLAY E SOUND
/DEMO
MODE /DEMO
TUNING
CLEAR EQ
MEMORY
EQ
Volume control
Main unit and remote control operation:
Press the VOL (+ or –) button to increase or decrease the volume.
E SOUND control
When the E SOUND/DEMO button is pressed, the unit will enter the
E Sound mode and adjust low bass and high frequency automatically
according to volume input. To change the setting, press the E
SOUND/DEMO button repeatedly to toggle ON or OFF.
Equalizer
When the EQ button is pressed, the current mode setting will be
displayed. To change to a different mode, press the EQ button
repeatedly until the desired sound mode appears.
FLAT No equalization.
For rock music.
ROCK
For classical music.
CLASSICS
POPS For pop music.
Vocals are enhanced.
VOCAL
For jazz.
JAZZ
Function
When the FUNCTION button on remote control is pressed, the
current function will change to different mode, press the FUNCTION
button repeatedly to select desired function.
iPod Tuner FM ST
AUX
Note:
The backup function protect the memorized function mode for a few
days should there be a power failure or the AC power cord becomes
disconnected.
0 .....
30 MAXIMUM
Tuner FM mono
AM