STIEBEL ELTRON DHE Connect 18 Operation And Installation Manual page 15

OPERATION
Settings
Menu structure
…  Device details
…  Version info
…  Licence information
 „ Connect
…  WLAN
…  App
… 
Bluetooth
…  Registration
…  Termination
…  Device name
 „ Service
…  Wireless
… … Log on programming unit
www.stiebel-eltron.com
Description
Device details display
Version display; check for updates possible for DHE Connect with WLAN connection. Install available
software updates successively.
Note: Do not isolate the device from the power supply during the software update. Otherwise the pro-
gramming unit may be damaged.
For DHE Connect only:
You must register to be able to use the radio and weather functions. Access to a broadband internet
connection via WLAN is required for use.
Visible WLAN transmitters are detected automatically (can take up to 1 minute). Make sure that your
router/repeater settings allow additional WLAN subscribers.
Use the "WPS" (WiFi Protected Setup) button for easy wireless home network registration. Alternative-
ly you can input the key manually, or connect to a hidden WLAN network by entering the SSID and key.
If your WLAN range does not cover your entire home, use a wireless repeater if necessary. The repeat-
er increases the WLAN range.
Deleting mobile terminal device connections.
®
Set up Bluetooth devices.
Registration for use of extended functions (weather data, internet radio, Bluetooth
"DHE Connect"..
Terminate registration
Device designation change
Menu for setting up the wireless connection between the instantaneous water heater and an external
programming unit or a remote control.
Start wireless pairing mode on the programming unit.
®
, App) on the
DHE Connect | DHE Touch | 71