Getting Started; Using The Manuals - Brother KIT CW Installation Manual

GETTING STARTED

GETTING STARTED

Using the Manuals

Installation Guide (this manual) — Read first —
The Installation Guide provides descriptions on the preparations needed to create cutwork. This guide
contains descriptions of the accessories, procedures for upgrading the machine as well as details on
installing the cutwork needles. In addition, this manual describes the procedure for installing PE-DESIGN
NEXT + CW. Read this guide first.
Upgrade KIT CW Operation Manual (For machines) (PDF version)
The Operation Manual provides descriptions for using the machine with the added cutwork functions. Be
sure to use the machine according to the descriptions in the Operation Manual.
This manual also provides cutwork precautions and information on the care and maintenance of the
machine.
PE-DESIGN NEXT + CW Instruction Manual (PDF version)
The Instruction Manual provides descriptions on using the PE-DESIGN NEXT + CW software.
An overview of the upgrade, a description of the new window, and information on the upgraded
functions are provided.
In addition, practical application of the upgraded functions can easily be conducted with tutorials using
sample designs.
■ Opening the PDF manuals
Download a copy of manuals using the Certification Key Issuing Wizard (see step
KIT CW Operation Manual and PE-DESIGN NEXT + CW Instruction Manual are combined into a single
manual file.
Note
®
• Adobe Reader
Instruction Manual.
• The procedures in the manuals are written for use in Windows
on an operating system other than Windows
differ slightly.
• The procedures in the manuals are written for use with 10-needle machine. The appearance of the
screens may differ slightly if 6-needle machine is used.
Memo
• After upgrading to the PE-DESIGN NEXT + CW software, you can view PE-DESIGN NEXT + CW
Instruction Manual (PDF version) by clicking
Manual (Cutwork)".
PE-DESIGN NEXT Instruction Manual (PDF version) (For customers using PE-
DESIGN versions 5, 6, 7 and 8)
To view descriptions of functions other than the cutwork functions, start the PE-DESIGN NEXT
application, and then click
then proceed to the "Instruction Manual", or click "Start" on your computer and then "All Programs",
then "PE-DESIGN NEXT", then "Instruction Manual".
4
®
is required for viewing and printing the PDF versions of the Operation Manual and
shown in the upper right hand corner of the Layout & Editing screen,
®
7. If the upgrade applications are used
®
7, the procedures and appearance of the windows may
on the Layout & Editing and selecting "Instruction
g on page 8). Upgrade