[Step 2-2]Connecting To The Computer - Brother KIT CW Installation Manual

INSTALLING THE UPGRADE KIT CW
c
Press .
d
Insert the USB media into the primary (top)
USB port connector on the right side of the
machine screen.
10
e
Press .
Note
• When the message "Upgrade complete."
appears, installation of the upgrade
application has been completed. (If an error
occurs, a message will appear in red.)
f
Remove the USB media.
Continue with [Step 3] (page 12).
■ [Step 2-2] Connecting to the
computer
a
While pressing the automatic needle-
threading button, turn the embroidery
machine on.