Figure 9: S101/S102 Switch Status On Uart3 When Communicating With Gsm Part - Quectel MC60-TE-A User Manual

Gsm/gprs/gnss module series

Hide thumbs Also See for MC60-TE-A:

Table of Contents

Figure 9: S101/S102 Switch Status on UART3 When Communicating with GSM Part

(2) Open the QCOM (AT command window) on PC. Set appropriate Baud Rate (such as 115200bps) and

COM number which can be checked by the Device Manager on PC.

(3) Connect the antenna to the GSM_ANT on MC60-TE-A with an RF cable.

(4) Insert SIM card into the SIM card socket.

(5) Insert earphone or handset into audio interface.

(6) For power on procedure, please refer to document [4].

(7) After waiting for 2~3 seconds, customers should first input "AT" or "at" string once or more until

receiving "OK" from the module in the HyperTerminal.

The module is set to autobauding mode in default configuration. This operation is to synchronize the

baud rate between the computer and the module.

(8) Input AT command and the module will execute its corresponding functions.

MC60-TE-A_User_Guide

GSM/GPRS/GNSS Module Series

Confidential / Released

MC60-TE-A User Guide

16 / 25

Table of Contents