Memory Check; Checking Time And Power Level - Sharp MODEL R-2197 Operation Manual

Memory Check

You can check the information programmed into the memory.

CHECKING TIME AND POWER LEVEL

* Suppose you want to know the information programmed into the memory 1, programmed for 4 minutes at 60% at the
1st sequence and 2 minutes at 30% at the 2nd sequence.
Step
1
Press the CHECK pad.
2
Press the NUMBER pad
Note: 1. To cancel MEMORY CHECK, press the CHECK pad.
2. When
3. To check the time constant for double quantity, press the DOUBLE QUANTITY pad and the desired
NUMBER pad in step 2.
Procedure
.
is displayed at Step 2, the memory is not set.
Pad Order
9
Display
NO. CHECK
NO. will flash on and off.
NO. CHECK
After about 1 sec.
CHECK
CHECK
CHECK
CHECK
REPEAT